GATE 2014 ME Set 2 · Question 16
A steel cube, with all faces free to deform, has Young's modulus, , Poisson's ratio, , and coefficient of thermal expansion, . The pressure (hydrostatic stress) developed within the cube, when it is subjected to a uniform increase in temperature, , is given by
- A
- B
- C
- D
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.6 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
When a body experiences a uniform temperature change , it undergoes free thermal strain given by:
Thermal stress develops only when the thermal deformation is restricted or constrained by external supports or neighboring material elements.
Since the steel cube has all faces free to deform, there are no boundary constraints or external forces to impede its expansion. As a result, the cube expands freely in all directions, and the normal stresses along all three orthogonal directions remain zero:
Hydrostatic stress (or pressure) is defined as:
Options (B), (C), and (D) correspond to configurations where deformation is completely constrained in one or more directions.
Answer: (A)
Practise Thermal Stresses
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Thermal Stresses
- GATE 2012 ME · Q42A solid steel cube constrained on all six faces is heated so that the temperature rises uniformly by Δ T. If…
- GATE 2023 ME · Q46Cylindrical bars P and Q have identical lengths and radii, but are composed of different linear elastic…
- GATE 2020 ME Set 2 · Q40A thin-walled cylinder of radius r and thickness t is open at both ends, and fits snugly between two rigid…
- GATE 2019 ME Set 1 · Q31A solid cube of side 1 m is kept at a room temperature of 32 °C. The coefficient of linear thermal expansion…
- GATE 2017 ME Set 2 · Q10A steel bar is held by two fixed supports as shown in the figure and is subjected to an increase of…
- GATE 2016 ME Set 2 · Q45A circular metallic rod of length 250 mm is placed between two rigid immovable walls as shown in the figure.…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.