GATE 2014 ME Set 3 · Question 43
The damping ratio of a single degree of freedom spring-mass-damper system with mass of , stiffness and viscous damping coefficient of is _______
GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.33 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
A single degree of freedom spring-mass-damper system has the following given parameters:
- Mass,
- Stiffness,
- Damping coefficient,
The undamped natural frequency is:
The critical damping coefficient is defined as:
The damping ratio is the ratio of actual damping coefficient to the critical damping coefficient:
Answer: 1.25
Practise Viscously Damped Free Vibration
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Viscously Damped Free Vibration
- GATE 2026 ME · Q18In a single degree of freedom vibrating system with only viscous damping, the critical damping coefficient…
- GATE 2025 ME · Q35A block of mass 1 kg connected to a spring of stiffness 10 N m-1 is operating in a viscous medium such that…
- GATE 2024 ME · Q25A linear spring-mass-dashpot system with a mass of 2 kg is set in motion with viscous damping. If the…
- GATE 2022 ME Set 2 · Q31For a dynamical system governed by the equation, x(t) + 2 ωn x(t) + ωn2 x(t) = 0, the damping ratio is equal…
- GATE 2021 ME Set 1 · Q35Consider a single degree of freedom system comprising a mass M, supported on a spring and a dashpot as shown…
- GATE 2020 ME Set 2 · Q17The equation of motion of a spring-mass-damper system is given by d2x/dt2 + 3dx/dt + 9x = 10 (5t) The…
Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.