PARIXO GATE · ME Open the app

GATE 2020 ME Set 2 · Question 56

2 marksNumerical answerManufacturing EngineeringNC/CNC Machines, CAD/CAM and Additive Manufacturing

A point ‘P’ on a CNC controlled XY- stage is moved to another point ‘Q’ using the coordinate system shown in the figure below and rapid positioning command (G00).

A pair of stepping motors with maximum speed of , controlling both the X and Y motion of the stage, are directly coupled to a pair of lead screws, each with a uniform pitch of . The time needed to position the point ‘P’ to the point ‘Q’ is _____ minutes *(round off to 2 decimal places)*.

Figure 1 for GATE 2020 ME Set 2 question 56

GATE 2020 · Mechanical Engineering · Set 2 · IIT Delhi · printed as Q.46 in the ME section

Answer
1.4 to 1.6

From the official answer key published by IIT Delhi.

Worked solution

The displacement along the X and Y axes from point to point is:

The maximum feed rate (rapid traverse velocity) of each axis with a motor speed of and lead screw pitch is:

Under rapid positioning command (G00), both axes move simultaneously at their maximum speed:

The total time required to reach point is determined by the slower axis:

Answer: 1.5

Practise NC/CNC Machines, CAD/CAM and Additive Manufacturing

30 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from NC/CNC Machines, CAD/CAM and Additive Manufacturing

Question from the official GATE 2020 ME paper (Set 2), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.