GATE 2025 ME · Question 17
In a laboratory experiment using a scaled down model to measure scour at a bridge pier, the Froude number is important. The ratio of the prototype length to the model length is 100. If the velocity of the model is , the velocity (in ) of the prototype is
- A
0.1
- B
1
- C
10
- D
100
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Dynamic similarity governed by gravity requires equality of the Froude number () between the model () and the prototype ():
Equating the Froude numbers:
Assuming the acceleration due to gravity is the same for both, the velocity ratio is given by:
Substitute the given values, and :
Answer: (C) 10
Practise Dimensional analysis and models
6 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Dimensional analysis and models
- GATE 2024 ME · Q51A liquid fills a horizontal capillary tube whose one end is dipped in a large pool of the liquid.…
- GATE 2023 ME · Q65An explosion at time t = 0 releases energy E at the origin in a space filled with a gas of density ρ.…
- GATE 2020 ME Set 1 · Q24Froude number is the ratio of
- GATE 2017 ME Set 2 · Q41For the laminar flow of water over a sphere, the drag coefficient CF is defined as CF = F / [ρ U2 D2], where…
- GATE 2016 ME Set 1 · Q50Oil (kinematic viscosity, oil = 1.0 × 10-5 m2/s) flows through a pipe of 0.5 m diameter with a velocity of…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.