GATE 2013 ME · Question 43
A hinged gate of length , inclined at with the horizontal and with water mass on its left, is shown in the figure below. Density of water is . The minimum mass of the gate in per unit width (perpendicular to the plane of paper), required to keep it closed is
- A
- B
- C
- D
GATE 2013 · Mechanical Engineering · IIT Bombay
Answer
From the official answer key published by IIT Bombay.
Worked solution
Let be the length of the gate and be the angle of inclination with the horizontal. Water is on the left (below the gate), pushing upward normal to the gate.
The hydrostatic pressure at a distance along the gate from the hinge is .
The opening moment about the hinge due to water pressure (per unit width) is:
The gate's weight acts vertically downward at its center of gravity (). The perpendicular distance from the hinge to the line of action of the weight is .
The closing moment due to the weight is:
To keep the gate closed, . For minimum mass:
Answer: (D)
Practise Hydrostatic forces on surfaces
4 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydrostatic forces on surfaces
- GATE 2023 ME · Q64The figure shows two fluids held by a hinged gate. The atmospheric pressure is Pa = 100 kPa. The moment per…
- GATE 2020 ME Set 1 · Q50The barrier shown between two water tanks of unit width (1 m) into the plane of the screen is modeled as a…
- GATE 2016 ME Set 2 · Q51Consider a frictionless, massless and leak-proof plug blocking a rectangular hole of dimensions 2R × L at…
Question from the official GATE 2013 ME paper, IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.