GATE 2016 ME Set 2 · Question 51
Consider a frictionless, massless and leak-proof plug blocking a rectangular hole of dimensions at the bottom of an open tank as shown in the figure. The head of the plug has the shape of a semi-cylinder of radius . The tank is filled with a liquid of density up to the tip of the plug. The gravitational acceleration is . Neglect the effect of the atmospheric pressure.
The force required to hold the plug in its position is
- A
- B
- C
- D
GATE 2016 · Mechanical Engineering · Set 2 · IISc Bangalore · printed as Q.41 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
The vertical hydrostatic force exerted by the liquid on the curved surface of the semi-cylindrical plug acts downward and is equal to the weight of the liquid column vertically above the plug.
The volume of the liquid directly above the plug is obtained by taking the volume of a rectangular prism of cross-sectional area and length , and subtracting the volume of the semi-cylinder:
The downward hydrostatic force exerted by the liquid is:
To keep the plug in static equilibrium against this downward force (neglecting the mass of the plug and atmospheric pressure), the required holding force is:
Thus, option (A) is correct.
Answer: (A)
Practise Hydrostatic forces on surfaces
4 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Hydrostatic forces on surfaces
- GATE 2013 ME · Q43A hinged gate of length 5 m, inclined at 30° with the horizontal and with water mass on its left, is shown…
- GATE 2023 ME · Q64The figure shows two fluids held by a hinged gate. The atmospheric pressure is Pa = 100 kPa. The moment per…
- GATE 2020 ME Set 1 · Q50The barrier shown between two water tanks of unit width (1 m) into the plane of the screen is modeled as a…
Question from the official GATE 2016 ME paper (Set 2), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.