GATE 2016 ME Set 1 · Question 42
A horizontal bar with a constant cross-section is subjected to loading as shown in the figure. The Young's moduli for the sections AB and BC are and , respectively.
For the deflection at C to be zero, the ratio is ________
GATE 2016 · Mechanical Engineering · Set 1 · IISc Bangalore · printed as Q.32 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
Let the length of both sections and be , and let the cross-sectional area be .
The internal axial force in section is tensile and equal to:
The axial elongation of section is:
By considering equilibrium of the free body from section to end , the internal axial force in section is:
The elongation of section is:
For the net deflection at point to be zero:
Answer: 4
Practise Simple Stress, Strain and Elastic Constants
22 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Simple Stress, Strain and Elastic Constants
- GATE 2016 ME Set 2 · Q33The value of true strain produced in compressing a cylinder to half its original length is
- GATE 2016 ME Set 3 · Q30Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
- GATE 2016 ME Set 3 · Q43A square plate of dimension L × L is subjected to a uniform pressure load p = 250 MPa on its edges as shown…
- GATE 2015 ME Set 2 · Q17A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is 200…
- GATE 2014 ME Set 1 · Q17A metallic rod of 500 mm length and 50 mm diameter, when subjected to a tensile force of 100 kN at the ends,…
- GATE 2014 ME Set 2 · Q34The relationship between true strain ( T) and engineering strain ( E) in a uniaxial tension test is given as
Question from the official GATE 2016 ME paper (Set 1), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.