PARIXO GATE · ME Open the app

GATE 2016 ME Set 3 · Question 23

1 markNumerical answerFluid MechanicsFluid kinematics

A channel of width 450 mm branches into two sub-channels having width 300 mm and 200 mm as shown in figure. If the volumetric flow rate (taking unit depth) of an incompressible flow through the main channel is and the velocity in the sub-channel of width 200 mm is 3 m/s, the velocity in the sub-channel of width 300 mm is ________ m/s.

Assume both inlet and outlet to be at the same elevation.

Figure 1 for GATE 2016 ME Set 3 question 23

GATE 2016 · Mechanical Engineering · Set 3 · IISc Bangalore · printed as Q.13 in the ME section

Answer
0.99 to 1.01

From the official answer key published by IISc Bangalore.

Worked solution

For steady, incompressible flow, the conservation of mass (continuity equation) requires that the total volumetric flow rate entering the junction equals the sum of the flow rates leaving it:

Given:

  • Inflow in main channel:
  • Width of first branch:
  • Velocity in first branch:
  • Width of second branch:
  • Depth: (unit depth)

The flow rate in the channel is:

By continuity:

The velocity in the branch is:

Answer: 1

Practise Fluid kinematics

28 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Fluid kinematics

Question from the official GATE 2016 ME paper (Set 3), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.