GATE 2017 ME Set 2 · Question 40
A -diameter water jet strikes a plate containing a hole of diameter as shown in the figure. Part of the jet passes through the hole horizontally, and the remaining is deflected vertically. The density of water is . If velocities are as indicated in the figure, the magnitude of horizontal force (in N) required to hold the plate is ________
GATE 2017 · Mechanical Engineering · Set 2 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Consider a control volume enclosing the plate and the fluid. By the linear momentum equation in the horizontal () direction:
The incoming jet has diameter and velocity :
The fluid leaving through the hole has diameter and continues horizontally at :
The remaining deflected fluid exits vertically, so its horizontal velocity is zero.
Let be the magnitude of the horizontal force applied to hold the plate:
Substituting :
Answer: 628.32
Practise Momentum equation and jets
9 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Momentum equation and jets
- GATE 2016 ME Set 3 · Q50The water jet exiting from a stationary tank through a circular opening of diameter 300 mm impinges on a…
- GATE 2014 ME Set 1 · Q44An ideal water jet with volume flow rate of 0.05 m3/s strikes a flat plate placed normal to its path and…
- GATE 2026 ME · Q53Water with a density of 1000 kg/m3 comes out of an industrial condenser through a horizontal pipe of 15 cm…
- GATE 2022 ME Set 1 · Q44Consider steady, one-dimensional compressible flow of a gas in a pipe of diameter 1 m. At one location in…
- GATE 2021 ME Set 1 · Q57A cylindrical jet of water (density = 1000 kg/m3) impinges at the center of a flat, circular plate and…
- GATE 2018 ME Set 1 · Q52A sprinkler shown in the figure rotates about its hinge point in a horizontal plane due to water flow…
Question from the official GATE 2017 ME paper (Set 2), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.