GATE 2020 ME Set 1 · Question 19
A helical gear with pressure angle and helix angle mounted at the mid-span of a shaft that is supported between two bearings at the ends. The nature of the stresses induced in the shaft is
- A
normal stress due to bending only
- B
normal stress due to bending in one plane and axial loading; shear stress due to torsion
- C
normal stress due to bending in two planes and axial loading; shear stress due to torsion
- D
normal stress due to bending in two planes; shear stress due to torsion
GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.9 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
A helical gear transmits power by exerting three force components on the shaft at the mesh point:
1. Tangential force (): acts perpendicular to the shaft axis and creates a twisting moment (torque) leading to torsional shear stress, as well as bending in the plane of the force.
2. Radial force (): acts radially towards the shaft axis, causing bending in a plane orthogonal to the plane of bending caused by .
3. Axial/thrust force (): acts parallel to the shaft axis. Because it acts at the pitch radius (an offset distance from the shaft centerline), it induces direct axial compressive or tensile loading as well as an additional bending moment.
Consequently, the shaft is subjected to:
- Normal stresses caused by bending moments in two perpendicular planes and the direct axial load.
- Shear stress caused by the transmitted torque (torsion).
*(Note: Option (A) was also accepted by GATE in the official key due to alternative interpretations of the question wording, but Option (C) fully describes the stress state).*
Answer: (C) normal stress due to bending in two planes and axial loading; shear stress due to torsion
Practise Shafts & Keys
3 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Shafts & Keys
Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.