GATE 2020 ME Set 1 · Question 18
A four bar mechanism is shown below.
For the mechanism to be a crank-rocker mechanism, the length of the link PQ can be
- A
- B
- C
- D
GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.8 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
According to the Grashof criterion, for a four-bar mechanism to have at least one link capable of full revolution (i.e., a Grashof mechanism), the condition must be satisfied, where is the length of the shortest link and is the length of the longest link.
Furthermore, for the mechanism to act as a crank-rocker, the shortest link must be adjacent to the fixed link (so that the shortest link can make a complete rotation while the other pivoted link rocks).
Here, the fixed link is , coupler , and rocker .
Testing the options for :
- If :
- , .
- The remaining links are , .
- Check Grashof condition:
Since () and the shortest link is adjacent to the fixed ground link , link can fully rotate as a crank, forming a crank-rocker mechanism.
- Other values like , , or either violate the Grashof inequality or do not make the driven/driver link the unique shortest link adjacent to the fixed frame.
Answer: (A)
Practise Planar Mechanisms, Mobility and Inversions
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Planar Mechanisms, Mobility and Inversions
- GATE 2020 ME Set 2 · Q18The number of qualitatively distinct kinematic inversions possible for a Grashof chain with four revolute…
- GATE 2018 ME Set 1 · Q18For an Oldham coupling used between two shafts, which among the following statements are correct? I.…
- GATE 2018 ME Set 1 · Q30A four bar mechanism is made up of links of length 100, 200, 300 and 350 mm. If the 350 mm link is fixed,…
- GATE 2016 ME Set 3 · Q20The number of degrees of freedom in a planar mechanism having n links and j simple hinge joints is
- GATE 2015 ME Set 2 · Q19The number of degrees of freedom of the planetary gear train shown in the figure is
- GATE 2015 ME Set 3 · Q39The number of degrees of freedom of the linkage shown in the figure is
Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.