GATE 2020 ME Set 1 · Question 41
A rigid mass-less rod of length is connected to a disc (pulley) of mass and radius through a friction-less revolute joint. The other end of that rod is attached to a wall through a friction-less hinge. A spring of stiffness is attached to the rod at its mid-span. An inextensible rope passes over half the disc periphery and is securely tied to a spring of stiffness at point C as shown in the figure. There is no slip between the rope and the pulley. The system is in static equilibrium in the configuration shown in the figure and the rope is always taut.
Neglecting the influence of gravity, the natural frequency of the system for small amplitude vibration is
- A
- B
- C
- D
GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.31 in the ME section
Answer
From the official answer key published by IIT Delhi.
Worked solution
Let the rigid massless rod rotate by a small angle about hinge A. The downward displacement and velocity of the disc's center B are:
Since the rope on the left is fixed and inextensible, the instantaneous center of rotation of the disc is at its left tangent point. With no slip, the angular velocity of the disc about B is:
The vertical displacement at point C (right tangent of the disc) is .
The potential energy of the springs is:
The kinetic energy of the disc (mass , ) is:
The natural frequency is:
Answer: (C)
Practise Equivalent Stiffness, Mass & Energy Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Equivalent Stiffness, Mass & Energy Methods
- GATE 2019 ME Set 1 · Q16The natural frequencies corresponding to the spring-mass systems I and II are ωI and ωII, respectively. The…
- GATE 2019 ME Set 1 · Q53A uniform thin disk of mass 1 kg and radius 0.1 m is kept on a surface as shown in the figure. A spring of…
- GATE 2017 ME Set 1 · Q46A thin uniform rigid bar of length L and mass M is hinged at point O, located at a distance of L/3 from one…
- GATE 2017 ME Set 2 · Q6A mass m is attached to two identical springs having spring constant k as shown in the figure. The natural…
- GATE 2016 ME Set 1 · Q47A solid disc with radius a is connected to a spring at a point d above the center of the disc. The other end…
- GATE 2016 ME Set 2 · Q47The system shown in the figure consists of block A of mass 5 kg connected to a spring through a massless…
Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.