GATE 2023 ME · Question 47
A very large metal plate of thickness and thermal conductivity is cooled by a stream of air at temperature with a heat transfer coefficient , as shown in the figure. The centerline temperature of the plate is . In which of the following case(s) can the lumped parameter model be used to study the heat transfer in the metal plate?
- A
, , ,
- B
, , ,
- C
, , ,
- D
, , ,
GATE 2023 · Mechanical Engineering · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
The lumped parameter model is valid when the internal conduction resistance is negligible compared to the external convection resistance, characterized by a Biot number:
For a large plate of thickness exposed to convective fluid on both faces, the characteristic length is:
Evaluating for each option:
- (A): , , :
- (B): , , :
- (C): , , :
- (D): , , :
Answer: (A) , , , ; (C) , , ,
Practise Unsteady State Heat Conduction
10 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Unsteady State Heat Conduction
- GATE 2021 ME Set 1 · Q23A hot steel spherical ball is suddenly dipped into a low temperature oil bath. Which of the following…
- GATE 2020 ME Set 1 · Q44A small metal bead (radius 0.5 mm), initially at 100°C, when placed in a stream of fluid at 20°C, attains a…
- GATE 2017 ME Set 2 · Q47A metal ball of diameter 60 mm is initially at 220 °C. The ball is suddenly cooled by an air jet of 20 °C.…
- GATE 2016 ME Set 1 · Q52A steel ball of 10 mm diameter at 1000 K is required to be cooled to 350 K by immersing it in a water…
- GATE 2016 ME Set 2 · Q53Two cylindrical shafts A and B at the same initial temperature are simultaneously placed in a furnace. The…
- GATE 2016 ME Set 3 · Q53A cylindrical steel rod, 0.01 m in diameter and 0.2 m in length is first heated to 750 °C and then immersed…
Question from the official GATE 2023 ME paper, IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.