GATE 2012 ME · Question 49
Common Data for Questions 48 and 49:
Two steel truss members, AC and BC, each having cross sectional area of , are subjected to a horizontal force as shown in figure. All the joints are hinged.
The maximum force in that can be applied at C such that the axial stress in any of the truss members DOES NOT exceed is
- A
- B
- C
- D
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
Let and be the tensile forces in members AC and BC, respectively. Considering the equilibrium of joint C:
Vertical equilibrium ():
Since both members have the same cross-sectional area , member AC experiences higher stress and reaches the maximum allowable axial stress of first.
The maximum permissible force in AC is:
The corresponding force in BC is:
Horizontal equilibrium ():
Answer: (B)
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2026 ME · Q41Two structural members are connected by a hinge and they are externally loaded as shown in the figure below.…
- GATE 2025 ME · Q27A truss structure is loaded as shown in the figure below. Among the options given, which member in the truss…
- GATE 2024 ME · Q58A three-hinge arch ABC in the form of a semi-circle is shown in the figure. The arch is in static…
- GATE 2023 ME · Q17The options show frames consisting of rigid bars connected by pin joints. Which one of the frames is…
- GATE 2022 ME Set 1 · Q49A structure, along with the loads applied on it, is shown in the figure. Self-weight of all the members is…
- GATE 2022 ME Set 2 · Q47The lengths of members BC and CE in the frame shown in the figure are equal. All the members are rigid and…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.