GATE 2014 ME Set 2 · Question 55
Consider laminar flow of water over a flat plate of length 1 m. If the boundary layer thickness at a distance of 0.25 m from the leading edge of the plate is 8 mm, the boundary layer thickness (in mm), at a distance of 0.75 m, is _______
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.45 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
For laminar flow over a flat plate, the boundary layer thickness at a distance from the leading edge is governed by the Blasius solution:
Therefore, the ratio of boundary layer thicknesses at two different locations and is:
Given , , and :
Answer: 13.86
Practise Boundary layer and separation
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Boundary layer and separation
- GATE 2012 ME · Q30An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is…
- GATE 2023 ME · Q19Air (density = 1.2 kg/m3, kinematic viscosity = 1.5× 10-5 m2/s) flows over a flat plate with a free-stream…
- GATE 2022 ME Set 1 · Q43A solid spherical bead of lead (uniform density = 11000 kg/m3) of diameter d = 0.1 mm sinks with a constant…
- GATE 2019 ME Set 2 · Q54The aerodynamic drag on a sports car depends on its shape. The car has a drag coefficient of 0.1 with the…
- GATE 2018 ME Set 2 · Q32The viscous laminar flow of air over a flat plate results in the formation of a boundary layer. The boundary…
- GATE 2017 ME Set 1 · Q30The velocity profile inside the boundary layer for flow over a flat plate is given as u/U = (π/2y/δ ), where…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.