GATE 2018 ME Set 2 · Question 32
The viscous laminar flow of air over a flat plate results in the formation of a boundary layer. The boundary layer thickness at the end of the plate of length L is . When the plate length is increased to twice its original length, the percentage change in laminar boundary layer thickness at the end of the plate (with respect to ) is ________ (correct to two decimal places).
GATE 2018 · Mechanical Engineering · Set 2 · IIT Guwahati · printed as Q.22 in the ME section
Answer
From the official answer key published by IIT Guwahati.
Worked solution
For steady, incompressible, laminar flow of fluid over a flat plate, the Blasius boundary layer thickness at a distance from the leading edge is given by:
At the end of a plate of length :
When the plate length is doubled to , the new boundary layer thickness at the trailing edge is:
The percentage change in boundary layer thickness is:
Answer: 41.42
Practise Boundary layer and separation
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Boundary layer and separation
- GATE 2017 ME Set 1 · Q30The velocity profile inside the boundary layer for flow over a flat plate is given as u/U = (π/2y/δ ), where…
- GATE 2017 ME Set 2 · Q17Consider a laminar flow at zero incidence over a flat plate. The shear stress at the wall is denoted by τw.…
- GATE 2016 ME Set 1 · Q51A steady laminar boundary layer is formed over a flat plate as shown in the figure. The free stream velocity…
- GATE 2015 ME Set 1 · Q17The Blasius equation related to boundary layer theory is a
- GATE 2015 ME Set 1 · Q62Air (ρ = 1.2 kg/m3 and kinematic viscosity, = 2 × 10-5 m2/s) with a velocity of 2 m/s flows over the top…
- GATE 2015 ME Set 2 · Q24Within a boundary layer for a steady incompressible flow, the Bernoulli equation
Question from the official GATE 2018 ME paper (Set 2), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.