GATE 2012 ME · Question 30
An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is at a location where the Reynolds number is 1000. If the velocity of the fluid alone is increased by a factor of 4, then the boundary layer thickness at the same location, in will be
- A
4
- B
2
- C
0.5
- D
0.25
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
For laminar flow over a flat plate with zero pressure gradient (since ), the boundary layer thickness at a distance from the leading edge is given by the Blasius solution:
At a fixed location , if the free stream velocity alone is increased by a factor of 4 ():
Given :
Answer: (C)
Practise Boundary layer and separation
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Boundary layer and separation
- GATE 2023 ME · Q19Air (density = 1.2 kg/m3, kinematic viscosity = 1.5× 10-5 m2/s) flows over a flat plate with a free-stream…
- GATE 2022 ME Set 1 · Q43A solid spherical bead of lead (uniform density = 11000 kg/m3) of diameter d = 0.1 mm sinks with a constant…
- GATE 2019 ME Set 2 · Q54The aerodynamic drag on a sports car depends on its shape. The car has a drag coefficient of 0.1 with the…
- GATE 2018 ME Set 2 · Q32The viscous laminar flow of air over a flat plate results in the formation of a boundary layer. The boundary…
- GATE 2017 ME Set 1 · Q30The velocity profile inside the boundary layer for flow over a flat plate is given as u/U = (π/2y/δ ), where…
- GATE 2017 ME Set 2 · Q17Consider a laminar flow at zero incidence over a flat plate. The shear stress at the wall is denoted by τw.…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.