GATE 2014 ME Set 3 · Question 48
A slider-crank mechanism with crank radius and connecting rod length is shown in figure. The crank is rotating with a uniform angular speed of , counter clockwise. For the given configuration, the speed (in m/s) of the slider is _______
GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.38 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Let be the crank pivot, be the crank pin, and be the slider pin. Given:
- Crank length
- Connecting rod length
- Angular velocity of crank
- Crank and connecting rod are perpendicular, so .
The velocity of point is:
Since is perpendicular to crank , and , is directed entirely along the connecting rod .
In the right-angled triangle (with hypotenuse along the horizontal line of stroke of the slider):
The angle between the connecting rod and the slider path satisfies:
Equating the velocity components along the rigid link :
Answer: 0.62
Practise Velocity and Acceleration Analysis
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Velocity and Acceleration Analysis
- GATE 2013 ME · Q6A link OB is rotating with a constant angular velocity of 2 rad/s in counter clockwise direction and a block…
- GATE 2012 ME · Q20In the mechanism given below, if the angular velocity of the eccentric circular disc is 1 rad/s, the angular…
- GATE 2024 ME · Q54At the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a…
- GATE 2023 ME · Q38The figure shows a wheel rolling without slipping on a horizontal plane with angular velocity ω1. A rigid…
- GATE 2022 ME Set 2 · Q52In the configuration of the planar four-bar mechanism at a certain instant as shown in the figure, the…
- GATE 2021 ME Set 2 · Q25Consider the mechanism shown in the figure. There is rolling contact without slip between the disc and…
Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.