GATE 2022 ME Set 2 · Question 52
In the configuration of the planar four-bar mechanism at a certain instant as shown in the figure, the angular velocity of the long link is . Given the dimensions as shown, the magnitude of the angular velocity of the long link is given by _______ *(round off to 2 decimal places)*.
GATE 2022 · Mechanical Engineering · Set 2 · IIT Kharagpur
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Let be the fixed pivot of link 2, be the pin joint between links 2 and 3, be the pin joint between links 3 and 4, and be the fixed pivot of link 4.
From the given figure:
- along the horizontal line of centers.
- Link 2 () has length and lies along the line of centers .
By the Aronhold-Kennedy theorem of three centers, the instantaneous center lies at the intersection of:
1. The line connecting and (the line of centers ).
2. The line connecting and (line ).
Since joint is already located on the line , the line intersects directly at point . Thus:
The distances from the fixed pivots to are:
Using the angular velocity ratio theorem:
Answer: 1.25
Practise Velocity and Acceleration Analysis
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Velocity and Acceleration Analysis
- GATE 2021 ME Set 2 · Q25Consider the mechanism shown in the figure. There is rolling contact without slip between the disc and…
- GATE 2019 ME Set 1 · Q40In a four bar planar mechanism shown in the figure, AB = 5 cm, AD = 4 cm and DC = 2 cm. In the configuration…
- GATE 2019 ME Set 2 · Q46The crank of a slider-crank mechanism rotates counter-clockwise (CCW) with a constant angular velocity ω, as…
- GATE 2019 ME Set 2 · Q49A four bar mechanism is shown in the figure. The link numbers are mentioned near the links. Input link 2 is…
- GATE 2017 ME Set 1 · Q47For an inline slider-crank mechanism, the lengths of the crank and connecting rod are 3 m and 4 m,…
- GATE 2017 ME Set 2 · Q12In a slider-crank mechanism, the lengths of the crank and the connecting rod are 100 mm and 160 mm,…
Question from the official GATE 2022 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.