GATE 2014 ME Set 4 · Question 16
In a statically determinate plane truss, the number of joints () and the number of members () are related by
- A
- B
- C
- D
GATE 2014 · Mechanical Engineering · Set 4 · IIT Kharagpur · printed as Q.6 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
For a plane (2D) truss:
- At each joint, there are two independent equations of static equilibrium: and .
- Therefore, for joints, the total number of equilibrium equations available is .
The total number of unknowns consists of the internal axial forces in members plus the external support reactions .
For a stable and externally determinate truss supported on standard supports, the number of reaction components is .
For static determinacy of the plane truss:
- If , the truss is unstable (mechanism/deficient).
- If , the truss is statically indeterminate (redundant).
Answer: (C)
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2014 ME Set 4 · Q42For the truss shown in the figure, the forces F1 and F2 are 9 kN and 3 kN, respectively. The force (in kN)…
- GATE 2012 ME · Q48Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2012 ME · Q49Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2026 ME · Q41Two structural members are connected by a hinge and they are externally loaded as shown in the figure below.…
- GATE 2025 ME · Q27A truss structure is loaded as shown in the figure below. Among the options given, which member in the truss…
- GATE 2024 ME · Q58A three-hinge arch ABC in the form of a semi-circle is shown in the figure. The arch is in static…
Question from the official GATE 2014 ME paper (Set 4), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.