GATE 2014 ME Set 4 · Question 42
For the truss shown in the figure, the forces and are and , respectively. The force (in ) in the member QS is
- A
11.25 tension
- B
11.25 compression
- C
13.5 tension
- D
13.5 compression
GATE 2014 · Mechanical Engineering · Set 4 · IIT Kharagpur · printed as Q.32 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
We use the method of sections by cutting through members , , and , and consider the equilibrium of the free body to the left of the cut.
The left section contains joint (at ) and joint (at ). The external forces acting on this portion consist solely of the downward force at joint .
The member connects joint to joint . The length of member is:
The sine of the inclination angle with the horizontal is:
Assuming member is in tension with force , it pulls joint upwards and to the right. Since members and are horizontal, considering vertical equilibrium () for the left portion:
Answer: (A) 11.25 tension
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2012 ME · Q48Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2012 ME · Q49Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2026 ME · Q41Two structural members are connected by a hinge and they are externally loaded as shown in the figure below.…
- GATE 2025 ME · Q27A truss structure is loaded as shown in the figure below. Among the options given, which member in the truss…
- GATE 2024 ME · Q58A three-hinge arch ABC in the form of a semi-circle is shown in the figure. The arch is in static…
- GATE 2023 ME · Q17The options show frames consisting of rigid bars connected by pin joints. Which one of the frames is…
Question from the official GATE 2014 ME paper (Set 4), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.