GATE 2015 ME Set 2 · Question 47
A hollow shaft of length is designed to transmit a power of at . The maximum permissible angle of twist in the shaft is . The inner diameter of the shaft is times the outer diameter. The modulus of rigidity is . The outside diameter (in mm) of the shaft is ________
GATE 2015 · Mechanical Engineering · Set 2 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
The torque transmitted by the shaft is:
From the torsion equation, the angle of twist is:
Given:
- Length,
- Modulus of rigidity,
- Permissible twist,
For a hollow shaft with :
Equating to :
Answer: 44.53 (acceptable range: 43 to 45)
Practise Torsion of Circular Shafts
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Torsion of Circular Shafts
- GATE 2015 ME Set 2 · Q48A hollow shaft (do = 2di where do and di are the outer and inner diameters respectively) needs to transmit…
- GATE 2014 ME Set 3 · Q17Two solid circular shafts of radii R1 and R2 are subjected to same torque. The maximum shear stresses…
- GATE 2023 ME · Q60A cylindrical transmission shaft of length 1.5 m and diameter 100 mm is made of a linear elastic material…
- GATE 2022 ME Set 2 · Q50A shaft of length L is made of two materials, one in the inner core and the other in the outer rim, and the…
- GATE 2019 ME Set 1 · Q30A cylindrical rod of diameter 10 mm and length 1.0 m is fixed at one end. The other end is twisted by an…
- GATE 2018 ME Set 2 · Q30A hollow circular shaft of inner radius 10 mm, outer radius 20 mm and length 1 m is to be used as a…
Question from the official GATE 2015 ME paper (Set 2), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.