GATE 2015 ME Set 3 · Question 30
A drill is positioned at point P and it has to proceed to point Q. The coordinates of point Q in the incremental system of defining position of a point in CNC part program will be
- A
- B
- C
- D
GATE 2015 · Mechanical Engineering · Set 3 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
In CNC part programming, two coordinate positioning modes are used:
1. Absolute programming (): All target coordinates are referenced from a fixed program origin .
2. Incremental programming (): The coordinates of the target point are specified as the relative displacement from the current position.
When a drill moves from point to point , the coordinates of point in the incremental system are given by:
Thus, in the incremental system, the coordinates of are .
Answer: (D)
Practise NC/CNC Machines, CAD/CAM and Additive Manufacturing
30 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from NC/CNC Machines, CAD/CAM and Additive Manufacturing
- GATE 2015 ME Set 3 · Q45In a CNC milling operation, the tool has to machine the circular arc from point (20, 20) to (10, 10) at…
- GATE 2014 ME Set 1 · Q30For machining a rectangular island represented by coordinates P(0,0), Q(100,0), R(100,50) and S(0,50) on a…
- GATE 2014 ME Set 2 · Q31A robot arm PQ with end coordinates P(0,0) and Q(2,5) rotates counter clockwise about P in the XY plane by…
- GATE 2014 ME Set 2 · Q62For the CNC part programming, match Group A with Group B: | Group A | Group B | | :--- | :--- | | P:…
- GATE 2013 ME · Q35In a CAD package, mirror image of a 2D point P(5,10) is to be obtained about a line which passes through the…
- GATE 2012 ME · Q15A CNC vertical milling machine has to cut a straight slot of 10 mm width and 2 mm depth by a cutter of 10 mm…
Question from the official GATE 2015 ME paper (Set 3), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.