GATE 2015 ME Set 3 · Question 31
Which two of the following joining processes are autogeneous?
(i) Diffusion welding
(ii) Electroslag welding
(iii) Tungsten inert gas welding
(iv) Friction welding
- A
(i) and (iv)
- B
(ii) and (iii)
- C
(ii) and (iv)
- D
(i) and (iii)
GATE 2015 · Mechanical Engineering · Set 3 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
An autogenous joining process is one in which coalescence is produced solely by the application of heat and/or pressure without the addition of any external filler metal.
- (i) Diffusion welding: A solid-state welding process where joining occurs by solid-state diffusion across the interface under elevated temperature and pressure without any filler material. Hence, it is autogenous.
- (ii) Electroslag welding: A fusion welding process typically used for thick plates that continuously feeds a consumable electrode (filler wire); it is non-autogenous.
- (iii) Tungsten inert gas (TIG) welding: Generally uses an external filler rod (though it can occasionally be done autogenously for very thin sheets, it is conventionally grouped with filler-based arc welding processes).
- (iv) Friction welding: A solid-state joining process where heat is generated by mechanical friction under compressive force; no filler metal is added. Hence, it is autogenous.
Therefore, processes (i) and (iv) are autogenous.
Answer: (A) (i) and (iv)
Practise Welding II: Resistance Welding, Solid-State Joining and Allied Processes
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Welding II: Resistance Welding, Solid-State Joining and Allied Processes
- GATE 2014 ME Set 1 · Q35In solid-state welding, the contamination layers between the surfaces to be welded are removed by
- GATE 2014 ME Set 3 · Q65For spot welding of two steel sheets (base metal) each of 3 mm thickness, welding current of 10000 A is…
- GATE 2013 ME · Q11Match the CORRECT pairs. | Processes | Characteristics / Applications | | :--- | :--- | | P. Friction…
- GATE 2025 ME · Q21The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for…
- GATE 2023 ME · Q23Two surfaces P and Q are to be joined together. In which of the given joining operation(s), there is no…
- GATE 2021 ME Set 1 · Q47The resistance spot welding of two 1.55 mm thick metal sheets is performed using welding current of 10000 A…
Question from the official GATE 2015 ME paper (Set 3), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.