GATE 2016 ME Set 1 · Question 51
A steady laminar boundary layer is formed over a flat plate as shown in the figure. The free stream velocity of the fluid is . The velocity profile at the inlet is uniform, while that at a downstream location is given by .
The ratio of the mass flow rate, , leaving through the horizontal section to that entering through the vertical section is ________
GATE 2016 · Mechanical Engineering · Set 1 · IISc Bangalore · printed as Q.41 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
Consider the control volume of unit depth perpendicular to the plane.
The mass flow rate entering section of height is:
The mass flow rate exiting through section is:
Let , then :
By conservation of mass for the control volume:
The ratio of mass flow rate leaving through to that entering through is:
Answer: 0.333
Practise Boundary layer and separation
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Boundary layer and separation
- GATE 2015 ME Set 1 · Q17The Blasius equation related to boundary layer theory is a
- GATE 2015 ME Set 1 · Q62Air (ρ = 1.2 kg/m3 and kinematic viscosity, = 2 × 10-5 m2/s) with a velocity of 2 m/s flows over the top…
- GATE 2015 ME Set 2 · Q24Within a boundary layer for a steady incompressible flow, the Bernoulli equation
- GATE 2014 ME Set 2 · Q55Consider laminar flow of water over a flat plate of length 1 m. If the boundary layer thickness at a…
- GATE 2012 ME · Q30An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is…
- GATE 2023 ME · Q19Air (density = 1.2 kg/m3, kinematic viscosity = 1.5× 10-5 m2/s) flows over a flat plate with a free-stream…
Question from the official GATE 2016 ME paper (Set 1), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.