GATE 2016 ME Set 2 · Question 18
A thin cylindrical pressure vessel with closed-ends is subjected to internal pressure. The ratio of circumferential (hoop) stress to the longitudinal stress is
- A
0.25
- B
0.50
- C
1.0
- D
2.0
GATE 2016 · Mechanical Engineering · Set 2 · IISc Bangalore · printed as Q.8 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
For a thin cylindrical pressure vessel of internal diameter and wall thickness subjected to internal gauge pressure , the stresses developed are:
1. Circumferential (hoop) stress:
2. Longitudinal (axial) stress:
The ratio of the circumferential stress to the longitudinal stress is:
Answer: (D) 2.0
Practise Thin Pressure Vessels
11 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Thin Pressure Vessels
- GATE 2015 ME Set 2 · Q18A gas is stored in a cylindrical tank of inner radius 7 m and wall thickness 50 mm. The gage pressure of the…
- GATE 2015 ME Set 3 · Q27A cylindrical tank with closed ends is filled with compressed air at a pressure of 500 kPa. The inner radius…
- GATE 2014 ME Set 4 · Q41A thin gas cylinder with an internal radius of 100 mm is subject to an internal pressure of 10 MPa. The…
- GATE 2013 ME · Q21A long thin walled cylindrical shell, closed at both the ends, is subjected to an internal pressure. The…
- GATE 2012 ME · Q10A thin walled spherical shell is subjected to an internal pressure. If the radius of the shell is increased…
- GATE 2026 ME · Q51A cylindrical pressure vessel made of steel has diameter of 3 m and wall thickness of 15 mm. For steel,…
Question from the official GATE 2016 ME paper (Set 2), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.