GATE 2016 ME Set 2 · Question 19
The forces and in a brake band and the direction of rotation of the drum are as shown in the figure. The coefficient of friction is 0.25. The angle of wrap is radians. It is given that and . The torque (in N-m) exerted on the drum is _______
GATE 2016 · Mechanical Engineering · Set 2 · IISc Bangalore · printed as Q.9 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
For a band brake, the tension on the tight side () and slack side () are related by the belt friction equation:
Given:
- Coefficient of friction,
- Angle of lap,
- Slack side tension,
- Drum radius,
Evaluating the tension ratio:
Therefore, the tight side force is:
The braking torque exerted on the drum is:
Answer: 2.25
Practise Brakes & Clutches
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Brakes & Clutches
- GATE 2016 ME Set 2 · Q22For the brake shown in the figure, which one of the following is TRUE?
- GATE 2014 ME Set 2 · Q45A disc clutch with a single friction surface has coefficient of friction equal to 0.3. The maximum pressure…
- GATE 2014 ME Set 3 · Q40A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of…
- GATE 2012 ME · Q44A force of 400 N is applied to the brake drum of 0.5 m diameter in a band-brake system as shown in the…
- GATE 2024 ME · Q59A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of…
- GATE 2023 ME · Q34The braking system shown in the figure uses a belt to slow down a pulley rotating in the clockwise direction…
Question from the official GATE 2016 ME paper (Set 2), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.