GATE 2022 ME Set 1 · Question 45
Consider a rod of uniform thermal conductivity whose one end () is insulated and the other end () is exposed to flow of air at temperature with convective heat transfer coefficient . The cylindrical surface of the rod is insulated so that the heat transfer is strictly along the axis of the rod. The rate of internal heat generation per unit volume inside the rod is given as
The steady state temperature at the mid-location of the rod is given as . What will be the temperature at the same location, if the convective heat transfer coefficient increases to ?
- A
- B
- C
- D
GATE 2022 · Mechanical Engineering · Set 1 · IIT Kharagpur
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
The steady, one-dimensional heat conduction equation with internal heat generation inside the rod is:
Integrating once with respect to :
At , the end is insulated, so , which yields .
At the other end ():
By energy balance at the convective boundary :
Since , we have , which implies , irrespective of the value of .
Integrating a second time:
Applying gives .
Thus, the temperature profile is entirely independent of . Consequently, changing to has no effect on the temperature at any location, including the mid-point.
Answer: (C)
Practise Conduction with Internal Heat Generation
7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Conduction with Internal Heat Generation
- GATE 2022 ME Set 2 · Q63Consider steady state, one-dimensional heat conduction in an infinite slab of thickness 2L (L = 1 m) as…
- GATE 2019 ME Set 1 · Q57Three slabs are joined together as shown in the figure. There is no thermal contact resistance at the…
- GATE 2017 ME Set 1 · Q38Heat is generated uniformly in a long solid cylindrical rod (diameter = 10 mm) at the rate of 4 × 107 W/m3.…
- GATE 2015 ME Set 2 · Q53A cylindrical uranium fuel rod of radius 5 mm in a nuclear reactor is generating heat at the rate of 4× 107…
- GATE 2013 ME · Q19Consider one-dimensional steady state heat conduction along x-axis (0 ≤ x ≤ L), through a plane wall with…
- GATE 2024 ME · Q48Consider a slab of 20 mm thickness. There is a uniform heat generation of q = 100 MW/m3 inside the slab. The…
Question from the official GATE 2022 ME paper (Set 1), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.