GATE 2022 ME Set 2 · Question 21
Match the additive manufacturing technique in Column I with its corresponding input material in Column II.
| Additive manufacturing technique (Column I) | | Input material (Column II) | |
| :--- | :--- | :--- | :--- |
| P | Fused deposition modelling | 1 | Photo sensitive liquid resin |
| Q | Laminated object manufacturing | 2 | Heat fusible powder |
| R | Selective laser sintering | 3 | Filament of polymer |
| | | 4 | Sheet of thermoplastic or green compacted metal sheet |
- A
P-3, Q-4, R-2
- B
P-1, Q-2, R-4
- C
P-2, Q-3, R-1
- D
P-4, Q-1, R-4
GATE 2022 · Mechanical Engineering · Set 2 · IIT Kharagpur
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
We match each additive manufacturing technique in Column I with its starting raw material in Column II:
1. Fused Deposition Modelling (FDM) (P): Uses a continuous filament of thermoplastic polymer (e.g., PLA, ABS) fed through a heated nozzle. Thus, P-3.
2. Laminated Object Manufacturing (LOM) (Q): Layers of material, such as paper, plastic films, or green compacted metal sheets, are successively bonded and cut with a laser. Thus, Q-4.
3. Selective Laser Sintering (SLS) (R): Uses a high-power laser to sinter powdered materials (heat-fusible polymer, ceramic, or metal powders) layer by layer. Thus, R-2.
Matching pairs give P-3, Q-4, R-2.
Answer: (A) P-3, Q-4, R-2
Practise NC/CNC Machines, CAD/CAM and Additive Manufacturing
30 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from NC/CNC Machines, CAD/CAM and Additive Manufacturing
- GATE 2022 ME Set 2 · Q22Which one of the following CANNOT impart linear motion in a CNC machine?
- GATE 2021 ME Set 1 · Q19In modern CNC machine tools, the backlash has been eliminated by
- GATE 2021 ME Set 1 · Q51The XY table of a NC machine tool is to move from P(1,1) to Q(51,1); all coordinates are in mm. The pitch of…
- GATE 2021 ME Set 2 · Q16In a CNC machine tool, the function of an interpolator is to generate
- GATE 2020 ME Set 2 · Q56A point ‘P’ on a CNC controlled XY- stage is moved to another point ‘Q’ using the coordinate system shown in…
- GATE 2019 ME Set 2 · Q28The transformation matrix for mirroring a point in x - y plane about the line y = x is given by
Question from the official GATE 2022 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.