GATE 2017 ME Set 2 · Question 12
In a slider-crank mechanism, the lengths of the crank and the connecting rod are and , respectively. The crank is rotating with an angular velocity of counter-clockwise. The magnitude of linear velocity (in m/s) of the piston at the instant corresponding to the configuration shown in the figure is ______
GATE 2017 · Mechanical Engineering · Set 2 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
In a slider-crank mechanism, the linear velocity of the piston at crank angle measured from the inner dead center (line of stroke) is given by:
where:
- is the crank length,
- is the connecting rod length,
- ,
- is the angular velocity of the crank.
From the figure, the crank is vertical ():
Substitute these values:
Alternatively, since the crank is perpendicular to the horizontal line of stroke, point moves purely horizontally with velocity . The perpendiculars to the velocities of and are both vertical, placing the instantaneous center of the connecting rod at infinity (pure translation at this instant), so .
Answer: 1
Practise Velocity and Acceleration Analysis
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Velocity and Acceleration Analysis
- GATE 2017 ME Set 2 · Q30Block 2 slides outward on link 1 at a uniform velocity of 6 m/s as shown in the figure. Link 1 is rotating…
- GATE 2016 ME Set 3 · Q19A rigid link PQ is undergoing plane motion as shown in the figure (VP and VQ are non-zero). VQP is the…
- GATE 2015 ME Set 2 · Q45In a certain slider-crank mechanism, lengths of crank and connecting rod are equal. If the crank rotates…
- GATE 2015 ME Set 3 · Q14In the figure, link 2 rotates with constant angular velocity ω2. A slider link 3 moves outwards with a…
- GATE 2014 ME Set 2 · Q49A rigid link PQ of length 2 m rotates about the pinned end Q with a constant angular acceleration of 12…
- GATE 2014 ME Set 3 · Q48A slider-crank mechanism with crank radius 60 mm and connecting rod length 240 mm is shown in figure. The…
Question from the official GATE 2017 ME paper (Set 2), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.