GATE 2025 ME · Question 44
For a fully-developed pipe flow, which of the following options is/are correct?
- A
For the same maximum velocity, the average velocity is higher in the turbulent regime than that of the laminar regime
- B
Compressibility effects are important if Mach number is less than 0.3
- C
For laminar flow, the friction factor is independent of surface roughness
- D
For laminar flow, friction factor decreases with decrease in Reynolds number
GATE 2025 · Mechanical Engineering · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Let us analyze each statement for fully developed pipe flow:
- Option (A): In laminar flow, the velocity profile is parabolic, giving . In turbulent flow, the profile is much flatter (e.g., using the power law, ). Therefore, for the same , the average velocity is higher in the turbulent regime. Hence, (A) is correct.
- Option (B): Compressibility effects become significant when the Mach number . For , the flow can be safely treated as incompressible. Hence, (B) is incorrect.
- Option (C): For fully developed laminar flow, the Darcy friction factor is given by the Hagen-Poiseuille equation:
which depends exclusively on the Reynolds number and is independent of pipe surface roughness. Hence, (C) is correct.
- Option (D): Since , the friction factor increases as decreases. Hence, (D) is incorrect.
Answer: (A) For the same maximum velocity, the average velocity is higher in the turbulent regime than that of the laminar regime; (C) For laminar flow, the friction factor is independent of surface roughness
Practise Laminar flow
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Laminar flow
- GATE 2021 ME Set 1 · Q32Consider fully developed, steady state incompressible laminar flow of a viscous fluid between two large…
- GATE 2020 ME Set 1 · Q59Consider steady, viscous, fully developed flow of a fluid through a circular pipe of internal diameter D. We…
- GATE 2019 ME Set 1 · Q55Two immiscible, incompressible, viscous fluids having same densities but different viscosities are contained…
- GATE 2019 ME Set 2 · Q33Water enters a circular pipe of length L = 5.0 m and diameter D = 0.20 m with Reynolds number ReD = 500. The…
- GATE 2019 ME Set 2 · Q53Water flows through two different pipes A and B of the same circular cross-section but at different flow…
- GATE 2016 ME Set 2 · Q50Consider fluid flow between two infinite horizontal plates which are parallel (the gap between them being 50…
Question from the official GATE 2025 ME paper, IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.