GATE 2026 ME · Question 17
A gear train with five gears is shown in the figure below. The number of teeth on each gear is , , , , and . The idler gear in this gear train is
- A
gear 1
- B
gear 2
- C
gear 3
- D
gear 4
GATE 2026 · Mechanical Engineering · IIT Guwahati
Answer
From the official answer key published by IIT Guwahati.
Worked solution
An idler gear is an intermediate gear that meshes with two other gears to change the direction of rotation or span a center distance, without affecting the magnitude of the overall speed ratio of the gear train.
From the given figure:
- Gear 1 (driver) meshes with Gear 2.
- Gear 2 and Gear 3 are mounted on the same shaft, forming a compound gear ().
- Gear 3 meshes with Gear 4.
- Gear 4 meshes with Gear 5 (driven).
The overall speed ratio is:
Since the number of teeth cancels out and does not affect the magnitude of the train value, gear 4 acts as an idler gear.
Answer: (D) gear 4
Practise Gears and Gear Trains
20 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Gears and Gear Trains
- GATE 2026 ME · Q22Worm gearsets are used for transmitting rotary motion between
- GATE 2024 ME · Q52The Levai type-A train illustrated in the figure has gears with module m = 8 mm/tooth. Gears 2 and 3 have 19…
- GATE 2023 ME · Q29Two meshing spur gears 1 and 2 with diametral pitch of 8 teeth per mm and an angular velocity ratio…
- GATE 2022 ME Set 1 · Q53A schematic of an epicyclic gear train is shown in the figure. The sun (gear 1) and planet (gear 2) are…
- GATE 2021 ME Set 2 · Q42A power transmission mechanism consists of a belt drive and a gear train as shown in the figure. Diameters…
- GATE 2020 ME Set 2 · Q39The sun (S) and the planet (P) of an epicyclic gear train shown in the figure have identical number of…
Question from the official GATE 2026 ME paper, IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.