GATE 2026 ME · Question 29
A hydraulic crane supports a mass of with its piston-cylinder actuator, inclined at with horizontal, as shown in the figure below. The diameter of the piston is and gravitational acceleration is . Neglecting mass of the piston, the reading of the pressure gage in (gage) is
- A
35.35
- B
61.26
- C
70.71
- D
6.13
GATE 2026 · Mechanical Engineering · IIT Guwahati
Answer
From the official answer key published by IIT Guwahati.
Worked solution
The load of mass exerts a vertically downward force due to gravity:
The piston axis is inclined at an angle with the horizontal. The component of the weight acting along the axis of the cylinder to compress the fluid is:
The cross-sectional area of the piston with diameter is:
Therefore, the gage pressure of the oil is:
Option (C) uses directly, ignoring inclination, while (A) uses .
Answer: (B) 61.26
Practise Pressure and its measurement
5 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Pressure and its measurement
- GATE 2021 ME Set 1 · Q31A pressure measurement device fitted on the surface of a submarine, located at a depth H below the surface…
- GATE 2020 ME Set 2 · Q25In the space above the mercury column in a barometer tube, the gauge pressure of the vapour is
- GATE 2016 ME Set 1 · Q49An inverted U-tube manometer is used to measure the pressure difference between two pipes A and B, as shown…
- GATE 2016 ME Set 2 · Q24Assuming constant temperature condition and air to be an ideal gas, the variation in atmospheric pressure…
Question from the official GATE 2026 ME paper, IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.