GATE 2012 ME · Question 29
Consider two infinitely long *thin* concentric tubes of circular cross section as shown in the figure. If and are the diameters of the inner and outer tubes respectively, then the view factor is given by
- A
- B
zero
- C
- D
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
For the inner tube (surface 1), which is convex, it cannot see itself:
Since the inner tube is completely enclosed by the outer tube (surface 2), by the summation rule:
Using the reciprocity theorem between surfaces 1 and 2:
Applying the summation rule for the inner surface of the outer tube (surface 2):
Answer: (D)
Practise View Factors & Radiation Network Analysis
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from View Factors & Radiation Network Analysis
- GATE 2026 ME · Q54Two rectangular surfaces both having 1 m2 area are placed perpendicular to each other with a common edge.…
- GATE 2025 ME · Q48Consider a cylindrical furnace of 5 m diameter and 5 m length with bottom, top and curved surfaces…
- GATE 2024 ME · Q50Consider a hemispherical furnace of diameter D = 6 m with a flat base. The dome of the furnace has an…
- GATE 2023 ME · Q43A cylindrical rod of length h and diameter d is placed inside a cubic enclosure of side length L. S denotes…
- GATE 2021 ME Set 1 · Q54A solid sphere of radius 10 mm is placed at the centroid of a hollow cubical enclosure of side length 30 mm.…
- GATE 2019 ME Set 2 · Q20Sphere 1 with a diameter of 0.1 m is completely enclosed by another sphere 2 of diameter 0.4 m. The view…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.