GATE 2014 ME Set 2 · Question 45
A disc clutch with a single friction surface has coefficient of friction equal to 0.3. The maximum pressure which can be imposed on the friction material is 1.5 MPa. The outer diameter of the clutch plate is 200 mm and its internal diameter is 100 mm. Assuming uniform wear theory for the clutch plate, the maximum torque (in N.m) that can be transmitted is _______
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.35 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
For a disc clutch under uniform wear theory, the product of pressure and radius is constant across the friction surface: .
The given parameters are:
- Coefficient of friction,
- Maximum pressure,
- Outer radius,
- Inner radius,
The axial force applied to the clutch is:
The mean radius of friction for uniform wear is:
Thus, the maximum torque transmitted by a single friction surface is:
Answer: 530.14
Practise Brakes & Clutches
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Brakes & Clutches
- GATE 2014 ME Set 3 · Q40A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of…
- GATE 2012 ME · Q44A force of 400 N is applied to the brake drum of 0.5 m diameter in a band-brake system as shown in the…
- GATE 2024 ME · Q59A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of…
- GATE 2023 ME · Q34The braking system shown in the figure uses a belt to slow down a pulley rotating in the clockwise direction…
- GATE 2021 ME Set 1 · Q63A short shoe drum (radius 260 mm) brake is shown in the figure. A force of 1 kN is applied to the lever. The…
- GATE 2020 ME Set 1 · Q47In a disc-type axial clutch, the frictional contact takes place within an annular region with outer and…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.