PARIXO GATE · ME Open the app

GATE 2020 ME Set 1 · Question 47

2 marksNumerical answerMachine DesignBrakes & Clutches

In a disc-type axial clutch, the frictional contact takes place within an annular region with outer and inner diameters 250 mm and 50 mm, respectively. An axial force is needed to transmit a torque by a new clutch. However, to transmit the same torque, one needs an axial force when the clutch wears out. If contact pressure remains uniform during operation of a new clutch while the wear is assumed to be uniform for an old clutch, and the coefficient of friction does not change, then the ratio is ____________ (*round off to 2 decimal places*).

GATE 2020 · Mechanical Engineering · Set 1 · IIT Delhi · printed as Q.37 in the ME section

Answer
0.85 to 0.89

From the official answer key published by IIT Delhi.

Worked solution

For a disc clutch with outer radius and inner radius :

1. Uniform Pressure Theory (New Clutch):
The effective friction radius is:

The torque capacity is .

2. Uniform Wear Theory (Old Clutch):
The effective friction radius is:

The torque capacity is .

Equating the torques for the same transmitted capacity and coefficient of friction:

Answer: 0.87

Practise Brakes & Clutches

12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Brakes & Clutches

Question from the official GATE 2020 ME paper (Set 1), IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.