PARIXO GATE · ME Open the app

GATE 2014 ME Set 3 · Question 40

2 marksNumerical answerMachine DesignBrakes & Clutches

A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of friction between drum and shoe is 0.2. The dimensions shown in the figure are in mm. The braking torque (in N.m) for the brake shoe is _______

Figure 1 for GATE 2014 ME Set 3 question 40

GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.30 in the ME section

Answer
63 to 65

From the official answer key published by IIT Kharagpur.

Worked solution

Let be the pivot of the brake lever. The forces acting on the lever are:
1. Applied load downwards at a distance of from the hinge.
2. Normal reaction from the drum on the shoe acting upwards at a distance of from the hinge.
3. Friction force acting on the shoe.

Since the drum rotates anticlockwise, its surface at the top contact moves to the left. Hence, the friction force acting on the brake shoe is directed towards the left, at a vertical distance of below the hinge.

Taking moments about the hinge for equilibrium of the lever (taking counterclockwise as positive):

Substitute :

The braking torque on the drum is:

Answer: 64

Practise Brakes & Clutches

12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Brakes & Clutches

Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.