GATE 2014 ME Set 2 · Question 49
A rigid link PQ of length 2 m rotates about the pinned end Q with a constant angular acceleration of . When the angular velocity of the link is , the magnitude of the resultant acceleration (in ) of the end P is _______
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.39 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
The rigid link of length rotates about the fixed pivot with an angular velocity and angular acceleration .
The acceleration of point relative to consists of two perpendicular components:
1. Tangential acceleration:
2. Centripetal (normal) acceleration:
The magnitude of the resultant acceleration of point is:
Answer: 40
Practise Velocity and Acceleration Analysis
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Velocity and Acceleration Analysis
- GATE 2014 ME Set 3 · Q48A slider-crank mechanism with crank radius 60 mm and connecting rod length 240 mm is shown in figure. The…
- GATE 2013 ME · Q6A link OB is rotating with a constant angular velocity of 2 rad/s in counter clockwise direction and a block…
- GATE 2012 ME · Q20In the mechanism given below, if the angular velocity of the eccentric circular disc is 1 rad/s, the angular…
- GATE 2024 ME · Q54At the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a…
- GATE 2023 ME · Q38The figure shows a wheel rolling without slipping on a horizontal plane with angular velocity ω1. A rigid…
- GATE 2022 ME Set 2 · Q52In the configuration of the planar four-bar mechanism at a certain instant as shown in the figure, the…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.