GATE 2014 ME Set 2 · Question 50
A spur pinion of pitch diameter 50 mm rotates at 200 rad/s and transmits 3 kW power. The pressure angle of the tooth of the pinion is . Assuming that only one pair of the teeth is in contact, the total force (in newton) exerted by a tooth of the pinion on the tooth on a mating gear is _______
GATE 2014 · Mechanical Engineering · Set 2 · IIT Kharagpur · printed as Q.40 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Given data for the spur pinion:
- Pitch diameter,
- Angular velocity,
- Power transmitted,
- Pressure angle,
The transmitted torque is:
The tangential force acting on the tooth is:
The total normal contact force exerted between the mating teeth is related to the tangential force by:
Answer: 638.52
Practise Spur & Helical Gears
5 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Spur & Helical Gears
- GATE 2025 ME · Q59A pair of spur gears is required to maintain a velocity ratio of 1:2. The module of the gears is 10 mm and…
- GATE 2020 ME Set 2 · Q51A steel spur pinion has a module (m) of 1.25 mm, 20 teeth and 20° pressure angle. The pinion rotates at 1200…
- GATE 2019 ME Set 1 · Q17A spur gear with 20° full depth teeth is transmitting 20 kW at 200 rad/s. The pitch circle diameter of the…
- GATE 2014 ME Set 1 · Q42A pair of spur gears with module 5 mm and a center distance of 450 mm is used for a speed reduction of 5:1.…
Question from the official GATE 2014 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.