GATE 2019 ME Set 1 · Question 54
A single block brake with a short shoe and torque capacity of is shown. The cylindrical brake drum rotates anticlockwise at and the coefficient of friction is . The value of , in mm (round off to one decimal place), such that the maximum actuating force is , is ________
GATE 2019 · Mechanical Engineering · Set 1 · IIT Madras · printed as Q.44 in the ME section
Answer
From the official answer key published by IIT Madras.
Worked solution
For a short shoe brake, the braking torque is given by:
Given , coefficient of friction , and drum radius :
The drum rotates anticlockwise, so at the contact point (top of the drum), the drum surface moves to the left. The friction force on the shoe acts in the direction of drum motion, i.e., to the left:
Taking moments of all forces acting on the lever about the pivot (hinge) at distance horizontally and vertically above the contact line:
Substitute , , and :
Answer: 212.5
Practise Brakes & Clutches
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Brakes & Clutches
- GATE 2019 ME Set 2 · Q52A short shoe external drum brake is shown in the figure. The diameter of the brake drum is 500 mm. The…
- GATE 2017 ME Set 2 · Q36A single-plate clutch has a friction disc with inner and outer radii of 20 mm and 40 mm, respectively. The…
- GATE 2016 ME Set 2 · Q19The forces F1 and F2 in a brake band and the direction of rotation of the drum are as shown in the figure.…
- GATE 2016 ME Set 2 · Q22For the brake shown in the figure, which one of the following is TRUE?
- GATE 2014 ME Set 2 · Q45A disc clutch with a single friction surface has coefficient of friction equal to 0.3. The maximum pressure…
- GATE 2014 ME Set 3 · Q40A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of…
Question from the official GATE 2019 ME paper (Set 1), IIT Madras. Solutions by PARIXO AI. All 65 questions of this paper.