GATE 2014 ME Set 3 · Question 54
Heat transfer through a composite wall is shown in figure. Both the sections of the wall have equal thickness (). The conductivity of one section is and that of the other is . The left face of the wall is at and the right face is at .
The interface temperature (in K) of the composite wall is ________
GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.44 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Under steady-state, one-dimensional heat conduction without internal heat generation, the heat flux through both sections of the composite wall is constant:
Given:
- Left face temperature,
- Right face temperature,
- Conductivities: and
- Thicknesses:
Equating the heat fluxes:
Cancelling from both sides:
Answer: 400
Practise 1D Steady Conduction, Resistance & Critical Insulation
17 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from 1D Steady Conduction, Resistance & Critical Insulation
- GATE 2014 ME Set 4 · Q52A plane wall has a thermal conductivity of 1.15 W/m.K. If the inner surface is at 1100°C and the outer…
- GATE 2022 ME Set 1 · Q60Consider a one-dimensional steady heat conduction process through a solid slab of thickness 0.1 m. The…
- GATE 2022 ME Set 1 · Q64Consider a solid slab (thermal conductivity, k = 10 W×m-1×K-1) with thickness 0.2 m and of infinite extent…
- GATE 2021 ME Set 1 · Q53An uninsulated cylindrical wire of radius 1.0 mm produces electric heating at the rate of 5.0 W/m. The…
- GATE 2020 ME Set 2 · Q34In a furnace, the inner and outer sides of the brick wall (k1 = 2.5 W/m.K) are maintained at 1100°C and…
- GATE 2019 ME Set 1 · Q21A slender rod of length L, diameter d (L d) and thermal conductivity k1 is joined with another rod of…
Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.