GATE 2014 ME Set 3 · Question 56
At the inlet of an axial impulse turbine rotor, the blade linear speed is , the magnitude of absolute velocity is and the angle between them is . The relative velocity and the axial component of velocity remain the same between the inlet and outlet of the blades. The blade inlet and outlet velocity triangles are shown in the figure. Assuming no losses, the specific work (in J/kg) is ________
GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.46 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
From Euler's turbine equation, the specific work done by an axial impulse turbine rotor is:
Given:
- Blade linear speed,
- Absolute inlet velocity,
- Absolute inlet flow angle,
The whirl velocity at inlet is:
The relative velocity at inlet has a tangential component:
Since the relative velocity magnitude and the axial velocity component remain unchanged across the blades (), the tangential component of relative velocity is reversed at the exit:
The whirl velocity at outlet is:
The change in whirl velocity is:
Thus, the specific work is:
Alternatively, using the kinetic energy form with as given in the outlet velocity triangle:
Answer: 3282
Practise Turbomachinery Fundamentals, Velocity Triangles & Similitude
7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Turbomachinery Fundamentals, Velocity Triangles & Similitude
- GATE 2012 ME · Q17The velocity triangles at the inlet and exit of the rotor of a turbomachine are shown. V denotes the…
- GATE 2020 ME Set 2 · Q28The values of enthalpies at the stator inlet and rotor outlet of a hydraulic turbomachine stage are h1 and…
- GATE 2019 ME Set 2 · Q58An idealized centrifugal pump (blade outer radius of 50 mm) consumes 2 kW power while running at 3000 rpm.…
- GATE 2018 ME Set 2 · Q55A test is conducted on a one-fifth scale model of a Francis turbine under a head of 2 m and volumetric flow…
- GATE 2016 ME Set 1 · Q28Consider two hydraulic turbines having identical specific speed and effective head at the inlet. If the…
- GATE 2016 ME Set 3 · Q29The blade and fluid velocities for an axial turbine are as shown in the figure. The magnitude of absolute…
Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.