PARIXO GATE · ME Open the app

GATE 2016 ME Set 3 · Question 29

1 markNumerical answerThermodynamicsTurbomachinery Fundamentals, Velocity Triangles & Similitude

The blade and fluid velocities for an axial turbine are as shown in the figure.

The magnitude of absolute velocity at entry is 300 m/s at an angle of to the axial direction, while the magnitude of the absolute velocity at exit is 150 m/s. The exit velocity vector has a component in the downward direction. Given that the axial (horizontal) velocity is the same at entry and exit, the specific work (in kJ/kg) is ________

Figure 1 for GATE 2016 ME Set 3 question 29

GATE 2016 · Mechanical Engineering · Set 3 · IISc Bangalore · printed as Q.19 in the ME section

Answer
50 to 54

From the official answer key published by IISc Bangalore.

Worked solution

The specific work output for an axial turbine is given by Euler's turbine equation:

where is the blade speed in the tangential (vertical) direction, and are the tangential (whirl) components of the absolute velocity at the inlet and exit.

Given:

  • Blade speed: (upward)
  • Absolute inlet velocity: at an angle of to the axial (horizontal) direction
  • Exit velocity:

The axial and whirl velocity components at the inlet are:

Since the axial velocity remains constant across the blade, . The whirl component at exit (directed downward, opposite to ) is:

Substituting these into Euler's equation:

Answer: 52.81 (Acceptable range: 50 to 54)

Practise Turbomachinery Fundamentals, Velocity Triangles & Similitude

7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Turbomachinery Fundamentals, Velocity Triangles & Similitude

Question from the official GATE 2016 ME paper (Set 3), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.