GATE 2012 ME · Question 17
The velocity triangles at the inlet and exit of the rotor of a turbomachine are shown. denotes the absolute velocity of the fluid, denotes the relative velocity of the fluid and denotes the blade velocity. Subscripts and refer to inlet and outlet respectively. If and , then the degree of reaction is
- A
0
- B
1
- C
0.5
- D
0.25
GATE 2012 · Mechanical Engineering · IIT Delhi
Answer
No official key survives for this paper; this is PARIXO AI's own answer, not official.
Worked solution
The degree of reaction for an axial turbomachine rotor (where blade speed ) is defined as the ratio of the static enthalpy change across the rotor to the total enthalpy change across the stage:
Given the conditions and , we have:
Substituting this into the expression for :
This corresponds to symmetric velocity triangles, which characterize a 50% reaction stage.
Answer: (C)
Practise Turbomachinery Fundamentals, Velocity Triangles & Similitude
7 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Turbomachinery Fundamentals, Velocity Triangles & Similitude
- GATE 2020 ME Set 2 · Q28The values of enthalpies at the stator inlet and rotor outlet of a hydraulic turbomachine stage are h1 and…
- GATE 2019 ME Set 2 · Q58An idealized centrifugal pump (blade outer radius of 50 mm) consumes 2 kW power while running at 3000 rpm.…
- GATE 2018 ME Set 2 · Q55A test is conducted on a one-fifth scale model of a Francis turbine under a head of 2 m and volumetric flow…
- GATE 2016 ME Set 1 · Q28Consider two hydraulic turbines having identical specific speed and effective head at the inlet. If the…
- GATE 2016 ME Set 3 · Q29The blade and fluid velocities for an axial turbine are as shown in the figure. The magnitude of absolute…
- GATE 2014 ME Set 3 · Q56At the inlet of an axial impulse turbine rotor, the blade linear speed is 25 m/s, the magnitude of absolute…
Question from the official GATE 2012 ME paper, IIT Delhi. Solutions by PARIXO AI. All 65 questions of this paper.