GATE 2014 ME Set 3 · Question 58
A double-pipe counter-flow heat exchanger transfers heat between two water streams. Tube side water at is heated from to . Shell side water at is entering at . Assume constant properties of water; density is and specific heat is . The LMTD (in ) is ________
GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.48 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Let subscript denote the cold stream (tube side) and denote the hot stream (shell side). Since both fluids are water with the same density and specific heat:
Substituting , , , , and :
For a counter-flow arrangement, the temperature differences at the two ends are:
The Logarithmic Mean Temperature Difference (LMTD) is:
Answer: 11.02
Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Exchangers: LMTD & Effectiveness-NTU Methods
- GATE 2012 ME · Q41Water (Cp = 4.18 kJ/kg.K) at 80°C enters a counterflow heat exchanger with a mass flow rate of 0.5 kg/s. Air…
- GATE 2026 ME · Q55Convective heat transfer coefficients for Fluid 1 and Fluid 2 in a heat exchanger, as shown in the figure…
- GATE 2024 ME · Q49A condenser is used as a heat exchanger in a large steam power plant in which steam is condensed to liquid…
- GATE 2023 ME · Q35Consider a counter-flow heat exchanger with the inlet temperatures of two fluids (1 and 2) being T1, in =…
- GATE 2022 ME Set 1 · Q65During open-heart surgery, a patient's blood is cooled down to 25 °C from 37 °C using a concentric tube…
- GATE 2022 ME Set 2 · Q64Saturated vapor at 200 °C condenses to saturated liquid at the rate of 150 kg/s on the shell side of a heat…
Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.