PARIXO GATE · ME Open the app

GATE 2026 ME · Question 55

2 marksNumerical answerHeat TransferHeat Exchangers: LMTD & Effectiveness-NTU Methods

Convective heat transfer coefficients for Fluid 1 and Fluid 2 in a heat exchanger, as shown in the figure below, are and , respectively. The inner tube is made of a material which has a thermal conductivity for the given range of temperatures in the heat exchanger. The length of the heat exchanging surface, the inside radius of the inner tube, and thickness of the inner tube are , , and , respectively. Considering no heat exchange between the outer tube and the surrounding, the heat transfer rate for the heat exchanger is ________ (*rounded off to 1 decimal place*).

Figure 1 for GATE 2026 ME question 55

GATE 2026 · Mechanical Engineering · IIT Guwahati

Answer
49.5 to 51.5

From the official answer key published by IIT Guwahati.

Worked solution

From the figure, the heat exchanger is in counter-flow arrangement:


The log mean temperature difference (LMTD) is:

The inner and outer radii of the inner tube are:

The thermal resistances per unit length () are:



The total thermal resistance is:

The heat transfer rate is:

Answer: 50.5

Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods

19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Heat Exchangers: LMTD & Effectiveness-NTU Methods

Question from the official GATE 2026 ME paper, IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.