GATE 2015 ME Set 2 · Question 42
For the truss shown in the figure, the magnitude of the force (in kN) in the member SR is
- A
10
- B
14.14
- C
20
- D
28.28
GATE 2015 · Mechanical Engineering · Set 2 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
First, determine the support reactions for the entire truss of span subjected to a vertical load of at joint ( from support ):
Next, pass a vertical cutting plane through members , , and , and consider the equilibrium of the right-hand section (containing joints and ):
Taking the sum of moments about joint for this section:
The member forces and pass through joint , so they produce no moment about .
The force in member acts at a perpendicular distance equal to the height of the truss (), and the reaction acts at a distance of from :
The negative sign indicates compression. Thus, the magnitude of the force in member is .
Answer: (C) 20
Practise Trusses and Frames
21 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Trusses and Frames
- GATE 2014 ME Set 2 · Q17A two member truss ABC is shown in the figure. The force (in kN) transmitted in member AB is _______
- GATE 2014 ME Set 4 · Q16In a statically determinate plane truss, the number of joints (j) and the number of members (m) are related by
- GATE 2014 ME Set 4 · Q42For the truss shown in the figure, the forces F1 and F2 are 9 kN and 3 kN, respectively. The force (in kN)…
- GATE 2012 ME · Q48Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2012 ME · Q49Common Data for Questions 48 and 49: Two steel truss members, AC and BC, each having cross sectional area of…
- GATE 2026 ME · Q41Two structural members are connected by a hinge and they are externally loaded as shown in the figure below.…
Question from the official GATE 2015 ME paper (Set 2), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.