GATE 2016 ME Set 2 · Question 22
For the brake shown in the figure, which one of the following is TRUE?
- A
Self energizing for clockwise rotation of the drum
- B
Self energizing for anti-clockwise rotation of the drum
- C
Self energizing for rotation in either direction of the drum
- D
Not of the self energizing type
GATE 2016 · Mechanical Engineering · Set 2 · IISc Bangalore · printed as Q.12 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
Consider the lever pivoted at the hinge (bottom-left) subjected to an actuating force directed downwards at the right end.
- The normal reaction force exerted by the drum on the shoe acts vertically upward, producing a counter-clockwise moment about the hinge, opposing the actuating force .
- For clockwise rotation of the drum, the friction force exerted by the drum on the shoe acts horizontally to the right (in the direction of drum motion at the contact point).
- Since the contact point between the drum and the shoe lies above the horizontal line of the hinge pivot, the friction force creates a clockwise moment about the hinge.
- This friction moment acts in the same rotational sense as the moment of the applied force (clockwise), thereby assisting in applying the brake and reducing the effort required. Hence, the brake is self-energizing for clockwise rotation.
For anti-clockwise rotation, the friction force acts to the left, opposing the application of the brake (self-de-energizing).
Answer: (A) Self energizing for clockwise rotation of the drum
Practise Brakes & Clutches
12 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Brakes & Clutches
- GATE 2014 ME Set 2 · Q45A disc clutch with a single friction surface has coefficient of friction equal to 0.3. The maximum pressure…
- GATE 2014 ME Set 3 · Q40A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of…
- GATE 2012 ME · Q44A force of 400 N is applied to the brake drum of 0.5 m diameter in a band-brake system as shown in the…
- GATE 2024 ME · Q59A band brake shown in the figure has a coefficient of friction of 0.3. The band can take a maximum force of…
- GATE 2023 ME · Q34The braking system shown in the figure uses a belt to slow down a pulley rotating in the clockwise direction…
- GATE 2021 ME Set 1 · Q63A short shoe drum (radius 260 mm) brake is shown in the figure. A force of 1 kN is applied to the lever. The…
Question from the official GATE 2016 ME paper (Set 2), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.