GATE 2016 ME Set 3 · Question 28
For a heat exchanger, is the maximum temperature difference and is the minimum temperature difference between the two fluids. is the log mean temperature difference. and are the minimum and the maximum heat capacity rates. The maximum possible heat transfer () between the two fluids is
- A
- B
- C
- D
GATE 2016 · Mechanical Engineering · Set 3 · IISc Bangalore · printed as Q.18 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
The maximum possible heat transfer rate in a heat exchanger () would be achieved in a counter-flow heat exchanger of infinite surface area.
In such an ideal situation, the fluid with the smaller heat capacity rate () undergoes the maximum possible temperature change, which is the difference between the inlet temperatures of the hot and cold fluids:
Thermodynamically, the fluid with the larger heat capacity rate () cannot undergo this entire temperature span without violating the Second Law. Therefore, the maximum possible heat transfer rate is:
Answer: (B)
Practise Heat Exchangers: LMTD & Effectiveness-NTU Methods
19 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Heat Exchangers: LMTD & Effectiveness-NTU Methods
- GATE 2015 ME Set 2 · Q52A balanced counterflow heat exchanger has a surface area of 20 m2 and overall heat transfer coefficient of…
- GATE 2015 ME Set 3 · Q22Saturated vapor is condensed to saturated liquid in a condenser. The heat capacity ratio is Cr = C C . The…
- GATE 2014 ME Set 2 · Q26In a heat exchanger, it is observed that Δ T1 = Δ T2, where Δ T1 is the temperature difference between the…
- GATE 2014 ME Set 2 · Q58In a concentric counter flow heat exchanger, water flows through the inner tube at 25°C and leaves at 42°C.…
- GATE 2014 ME Set 3 · Q58A double-pipe counter-flow heat exchanger transfers heat between two water streams. Tube side water at 19…
- GATE 2012 ME · Q41Water (Cp = 4.18 kJ/kg.K) at 80°C enters a counterflow heat exchanger with a mass flow rate of 0.5 kg/s. Air…
Question from the official GATE 2016 ME paper (Set 3), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.