GATE 2016 ME Set 3 · Question 44
Two circular shafts made of same material, one solid (S) and one hollow (H), have the same length and polar moment of inertia. Both are subjected to same torque. Here, is the twist and is the maximum shear stress in the solid shaft, whereas is the twist and is the maximum shear stress in the hollow shaft. Which one of the following is TRUE?
- A
and
- B
and
- C
and
- D
and
GATE 2016 · Mechanical Engineering · Set 3 · IISc Bangalore · printed as Q.34 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
The angle of twist for a shaft under torque is given by the torsion formula:
Since both shafts have the same material (), same length (), same polar moment of inertia (), and are subjected to the same torque ():
The maximum shear stress occurs at the outermost fiber and is given by:
For the solid shaft of radius and hollow shaft of outer radius and inner radius , their polar moments of inertia are:
Since , it follows that:
Because the outer radius of the hollow shaft is greater than the radius of the solid shaft, the maximum shear stress is:
Thus, and .
Answer: (D) and
Practise Torsion of Circular Shafts
14 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Torsion of Circular Shafts
- GATE 2015 ME Set 1 · Q25Consider a stepped shaft subjected to a twisting moment applied at B as shown in the figure. Assume shear…
- GATE 2015 ME Set 2 · Q47A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible…
- GATE 2015 ME Set 2 · Q48A hollow shaft (do = 2di where do and di are the outer and inner diameters respectively) needs to transmit…
- GATE 2014 ME Set 3 · Q17Two solid circular shafts of radii R1 and R2 are subjected to same torque. The maximum shear stresses…
- GATE 2023 ME · Q60A cylindrical transmission shaft of length 1.5 m and diameter 100 mm is made of a linear elastic material…
- GATE 2022 ME Set 2 · Q50A shaft of length L is made of two materials, one in the inner core and the other in the outer rim, and the…
Question from the official GATE 2016 ME paper (Set 3), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.